Setting the SPA3102 to Bridge Mode

From Asterisk Australia
Jump to: navigation, search

Q. How do I reset the Linksys VOIP router to factory default?



The router can be set to factory default by pressing the Reset button of the router and resetting through the router's web-based setup page.</p>

Resetting the Router using the Reset Button

Pressing the Reset button on the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router's IP address will become "192.168.15.1" and the username and password will be "admin" after resetting.

Note: Take note of the current settings of the device before resetting.

http://www.cisco.com/image/gif/paws/108652/4645-001.png

To reset the router via its web-based setup page, follow the steps below.

Resetting the Router Using the Web-Based Setup Page

Step 1:
Access the router's web-based setup page. For instructions, click <a href="../../../../en/US/products/ps10024/products_qanda_item09186a0080a35691.shtml">here</a>.

Step 2:
When the router's web-based setup page appears, click Administration then Factory Defaults.

http://www.cisco.com/image/gif/paws/108652/4645-003.png

Step 3:
Select Yes on the Restore Factory Defaults option.

http://www.cisco.com/image/gif/paws/108652/4645-005.png

Step 4:

Click http://www.cisco.com/image/gif/paws/108652/4058-005.jpg.