Setting-Up a PlayStation®2 with a Cisco VOIP Router
From Asterisk Australia
Q. How do I set-up my PlayStationregTag;2 with my Linksys VOIP router?
Note: Before proceeding please take note that Linksys does NOT support the configuration of PlayStationregTag;2. The following instructions simply tell you how to configure the router for the PlayStationregTag;2, not the game console itself. For technical support on the PS2regTag;, contact Sony.
In setting-up a PlaystationregTag;2 on the Linksys router, you will need to perform two steps:</p>
- Setting-Up the PlaystationregTag; 2
- Configuring the Router
Setting-Up the PlayStationregTag;2
Step 1:
After installing your PlayStationregTag;2 Network Adapter, connect a regular straight thru cable from one of the numbered ports on the router. Plug the other end of the cable into the PlayStationregTag;2's Network Adapters Ethernet port.
Step 2:
You must assign a static IP address on PlayStationregTag;2. To do that, please consult your PlayStationregTag;2 documentation, or click <a href="http://www.us.playstation.com/support/ps2/networkadaptor/50000/s_ps2_ac_NI_3.html">here</a>. In this example "192.168.15.20" was used for the IP Address, "255.255.255.0" for the Subnet mask, "192.168.15.1" for the Default Gateway, and your DNS information.
Once the PlayStationregTag;2 is set-up, configure the Linksys router by following the instructions below.
Configuring the Router
Step 1:
Access the router's web-based setup page. For instructions, click <a href="../../../../en/US/products/ps10024/products_qanda_item09186a0080a35691.shtml">here</a>.Step 2:
When the router's web-based setup page appears, click Applications and Gaming and then click DMZ.Step 3:
Select Enabled and enter the PlayStationregTag;2's IP address in the DMZ Host IP Address.
Step 4:
Click
.
