Setting-Up Call Forwarding on the PAP2

From Asterisk Australia

Q. How do I setup call forwarding on the PAP2?

Note: This procedure only applies to all incoming call that has to be forwarded in a specific or extension number  </p>

Step 1:
Access the PAP2's web-based setup page. For instructions, click <a href="../../../../en/US/products/ps10024/products_qanda_item09186a0080a35a29.shtml">here</a>.  

Step 2:
Click USER1 and look for Call Forward Settings. Under Cfwd All Dest enter the number or extension number where you want to forward all incoming calls. 

Note: To forward incoming calls after specific rings say after 2 to 3 rings in a certain extension number please follow the steps below. 

Step 3:
Look for Cfwd No Ans Dest and enter the extension number where you wanted to forward the call.

Note: Cfwd No Ans Delay can be set to your desired number of rings you want before forwarding the call let say 20 seconds is equivalent to four rings. You can set it to 10 if you want two rings and call will be forwarded right away to the number you specify under Cfwd No Ans Dest. Each ring is equivalent to five seconds. 

Step 4:
Click Save Settings.