Initial configuration
From Asterisk Australia
Q. How to configure the SPA-901?
Note: The following is an example of registering your SPA901 Phone to FreeWorld Dial-up. The configuration settings may vary depending on the requirements of your VoIP Provider.</p>
You need to perform three steps if you want to configure your SPA901 Series Phone to FreeWorld Dial-up
- Registration of VoIP account
- Accessing the SPA901 web user interface
- Configuring the SPA901 phone for VoIP
Registration of VoIP Account
Step 1:
Go to <a href="http://account2.freeworlddialup.com/index.php?section_id=94">FreeWorld Dial-up</a> registration site to sign-up for a free VoIP account.
Accessing the SPA901 web user interface
Step 1:
Check your SPA901 IP Address. Quickly press **** (asterisk/star key) on the dial pad. After "configuration menu" dial 110#. Take note of the IP address.Step 2:
Launch your browser and type in http://IP_Address_of_your_SPA901 ont he address field then hit Enter. You're now ready to configure the SPA901 for VoIP.
Note: If the web interface is asking for a username and password, this means that the unit was locked by your Provider. Please contact your respective VoIP Provider for assistance.
Configuring the SPA901 phone for VoIP
Step 1:
Go to Admin Login then Advanced, click on Ext 1 tab. To get connected to FWD you must input your FWD number and password which you will receive after registration on their website together with the following standard configuration settings:
Step 2:
Click on Submit All Changes then check Registration State on Info tab under EXT 1 Status.
