TDM410
From Asterisk Australia
Contents |
Digium TDM410P
The Digium TDM410P card will allow you to connect up to 4 analog extensions or 4 analog carrier lines to your Asterisk PBX. The card also supports an echo cancellation module.- The 12V Power connector is only required when running FXS modules.
OnBoard Echo Cancellation
This card supports onboard echo cancellation. You can order this at the time you purchase your card, the model number is suffixed with an E. Eg. TDM411E. If you are purchasing just the echo cancellation module, the model number is : VPMADT032.
Configuration Matrix
Below is the configuration options for the TDM410P. The TDM410P can support either the 4 port x400M or single port x100m modules.
| FXS Ports | |||||
|---|---|---|---|---|---|
| FXO Ports | 0 | 1 | 2 | 3 | 4 |
| 0 | N/A | TDM401B | TDM402B | TDM403B | TDM404B |
| 1 | TDM410B | TDM411B | TDM412B | TDM413B | TDM414B |
| 2 | TDM420B | TDM421B | TDM422B | TDM423B | TDM424B |
| 3 | TDM430B | TDM431B | TDM432B | TDM433B | TDM434B |
| 3 | TDM440B | TDM441B | TDM442B | TDM443B | TDM444B |
Where to Buy
| TDM410P TDM400 4 port FXO card asterisk trixbox,elastix $79.00 Click to Buy |
Asterisk Card tdm410p tdm400p tdm800p tdm410 tdm400 NEW $79.00 Click to Buy |
TDM400P TDM410P 4 FXO / FXS for Digium Asterisk Trixbox $92.00 Click to Buy |
FXS card FXO card TDM410P Asterisk Card tdm400p tdm410 tdm400 elastix freepbx $84.94 Click to Buy |
TDM400P with 4 FXO ports FXS FXO card trixbox card tdm410p asterisk card tdm410 $79.00 Click to Buy |
| Asterisk Elastix Trixbox 4 FXO FXS TDM400P TDM410P card $92.00 Click to Buy |
TDM400P with 4 FXO ports FXO card trixbox card elastix card tdm410p chinaroby $79.00 Click to Buy |
Asterisk Card tdm410p 4 x FXO card ChinaRoby tdm400p + $79.00 Click to Buy |
SpoTel TDM400P TDM410P version 2 for Trixbox Digium Asterisk pbx, 2FXO 2 FXS $92.00 Click to Buy |
4 port FXS FXO card TDM410P Asterisk Card tdm400 tdm400p tdm410 trixbox card pbx $84.94 Click to Buy |
| Asterisk Card tdm410p 4x FXO card tdm400p a400p tdm410 $79.00 Click to Buy |
4 FXO card TDM400P elastix card tdm400 tdm410 tdm410p trixbox card elastix card $79.00 Click to Buy |
PCI-E Asterisk Card AEX410 PCI Express 4 FXS/FXO card aex410p tdm410 tdm410p $149.00 Click to Buy |
4 port FXS FXO card TDM410P Asterisk Card tdm400 tdm400p tdm410 trixbox card pbx $84.94 Click to Buy |
Australian Technology Partnerships The Official Distributor of Digium | Asterisk
- VoIPShop
- OpenVox A400P a generic alternative to the Digium TDM410P around half for a filled board (eg 04B).
Install Tips
In Australia, for the TDM400P it is well documented that you require options wctdm opermode=AUSTRALIA in modprobe.conf. The TDM410P uses a different driver, so in /etc/modprobe.conf you require options wctdm24xxp opermode=AUSTRALIA. Restart the zaptel driver after the change with /etc/init.d/zaptel restart You can tell that your card is in Australia mode by typing dmesg at the prompt. The output will display Australia if your TDM410P settings are correct and FCC if they are incorrect.
